scurvydog_pnw
Veteran Member
- Joined
- Dec 27, 2020
- Messages
- 63
Hey folks,
I thought I would check to see if anyone has put in a Maretron J2k100 J1939 to NEMA2k gateway on a John Deere 4050 engine? This is my next project and besides the below link I found a reference that the engine itself may have a port available that is used for mechanics to pull data off of. However, there is at least a dozen different connections on the engine or engine computer. If someone has done this I would love to hear.
https://www.maretron.com/support/knowledgebase/phpkbv7/article.php?id=563
I thought I would check to see if anyone has put in a Maretron J2k100 J1939 to NEMA2k gateway on a John Deere 4050 engine? This is my next project and besides the below link I found a reference that the engine itself may have a port available that is used for mechanics to pull data off of. However, there is at least a dozen different connections on the engine or engine computer. If someone has done this I would love to hear.
https://www.maretron.com/support/knowledgebase/phpkbv7/article.php?id=563