Times a wastin
Newbie
- Joined
- Apr 11, 2021
- Messages
- 2
I have a dragonfly 6 depth sounder in my Bayliner 4087 aft cockpit for fishing and wanting to buy a raymarine MFD for the bridge to work with my recently installed raymarine p70Rs autopilot. Will an Axiom 9" mfd connect to my dragonfly 6 transducer by way of a splitter?
I don't really want to have to pull the boat out of the water again to install anothertransducer. The dragonfly 6 came with a transom mount transducer which won't work on a twin diesel boat due to prop wash so I installed it inside the hull with a large amount of silicone shooting through the fibreglass. It works perfect to 600'
Is there a splitter available that will work with my current dragonfly depth sounder and a new Raymarine MFD. Tried contacting Raymarine but it's painful being able to talk to anyone.
Thx for any advise
Lee
I don't really want to have to pull the boat out of the water again to install anothertransducer. The dragonfly 6 came with a transom mount transducer which won't work on a twin diesel boat due to prop wash so I installed it inside the hull with a large amount of silicone shooting through the fibreglass. It works perfect to 600'
Is there a splitter available that will work with my current dragonfly depth sounder and a new Raymarine MFD. Tried contacting Raymarine but it's painful being able to talk to anyone.
Thx for any advise
Lee