View Single Post
Old 08-13-2012, 05:41 AM   #5
FF
Guru
 
FF's Avatar
 
Join Date: Oct 2007
Posts: 22,553
One concern that is frequently a question is when to measure the oil level.

Cold engine works for some , but not for many .

DD wants a 3 min wait after shutdown , which means lots of oil is still in the passages.

A good question is always WHEN?

Remarking the stick is fine , IF the engine was installed within the Mfg specs for out of level.Always in Da Book.

FF
FF is offline   Reply With Quote