View Single Post
Old 11-20-2020, 01:36 PM   #6
Comodave
Moderator Emeritus
 
Comodave's Avatar
 
City: Au Gres, MI
Vessel Name: Black Dog
Vessel Model: Formula 41PC
Join Date: Jul 2015
Posts: 21,191
What is the distance from the back of the skeg to the front of the prop. It should not be more than 1 shaft thickness. Out shafts are 2” so I can’t go more than 2” unsupported shaft from the last strut, in your case the skeg, to the front of the prop. Otherwise if it is too long you may break the shaft. Our props are very close to the last strut so I had to have spacers made when I removed the drivesavers. But I was able to align the engine properly and did loose some vibrations.
__________________
Boat Nut:
If you are one there is no explanation necessary.
If you aren’t one, there is no explanation possible.
Comodave is online now   Reply With Quote