View Single Post
Old 11-19-2020, 09:51 PM   #2
Comodave
Moderator Emeritus
 
Comodave's Avatar
 
City: Au Gres, MI
Vessel Name: Black Dog
Vessel Model: Formula 41PC
Join Date: Jul 2015
Posts: 21,187
I am doing it this winter, actually just finished. I get rid of them and glass them closed. I just glassed 6 holes closed on the starboard side, 2 transducers and a bronze sinistered plate with 4 bolt holes. Last winter I did the port side and glassed 2 old transducer and a thru hull closed. It makes for less hull penetrations and lesst possibility of leaks. And the engine room looks much better. It isn’t that hard to do. I had a thru hull that I couldn’t get loose. I took the grinder and ground the mushroom head off. Didn’t take long. Glassing them closed was easy also. Then I painted the glass work with epoxy barrier with 6 coats expoy and 2 coats bottom paint. Good luck.
__________________
Boat Nut:
If you are one there is no explanation necessary.
If you aren’t one, there is no explanation possible.
Comodave is offline   Reply With Quote