I’m guessing it is on the incoming side. Ten gauge wire which is coming from the 10/2 position on the Ship/Off/Shore switch. It is only about a 5 inch wire coming from the switch to the breaker. You can see where it burned away from the breaker and the end of the wire sticking up in the first picture.
The burnt wire terminated on the switch and wire location is the big yellow lug on lower left of the switch picture 2
There is also a heavy gauge white wire coming off the bottom opposite side of the same switch which shows heat distress the first inch, 3rd picture.
I haven’t looked to see where it goes yet.
Yes, pretty old stuff! Airpax breakers
|