LeoKa
Guru
- Joined
- Apr 15, 2017
- Messages
- 1,150
- Location
- USA
- Vessel Name
- Ironsides
- Vessel Make
- 54' Bruce Roberts steel sailboat hull, coastal LRC, 220HP CAT 3306.
My Garmin chart plotter is showing error messages about the transducer not being connected. The boat was hauled out in December and the bottom was cleaned. There is some growth on the hull, but not significant.
The Garmin functions fine and it has the latest software installed.
How do I troubleshoot this connection problem?
I will attach some photos.
Thanks.
The Garmin functions fine and it has the latest software installed.
How do I troubleshoot this connection problem?
I will attach some photos.
Thanks.