Maerin
Guru
In the course of refitting the A/C systems on board, I've discovered that the breakers on the 220V panel are wired with the line/load reversed, e.g. back feeding. I've added a breaker previously, I'm sort of embarrassed that I missed it before, but in my red-faced defense, the load/line indicators are on the bottom of the breakers and not visible without removing them. They were wired that way OEM, but all the other breakers are wired correctly.
I've scoured the Carlingswitch information on line, and I've not found any indication that they can't be backfed, nor that they can. Anyone know for sure? The next step will be to contact the manufacturer to get a determination of whether I need to correct the wiring. Of course a change will require the wire to be about 2" longer to each one! That'll be fun!
I've scoured the Carlingswitch information on line, and I've not found any indication that they can't be backfed, nor that they can. Anyone know for sure? The next step will be to contact the manufacturer to get a determination of whether I need to correct the wiring. Of course a change will require the wire to be about 2" longer to each one! That'll be fun!