01-22-2012, 01:41 PM
|
#2
|
Guru
City: North Charleston, SC
Join Date: Sep 2010
Posts: 4,870
|
RE: Tank Level monitors
Quote:
Tidahapah wrote:
Have just bought and fitted a Gobius tank level monitoring system for my polyethelene holding tank.
So far very impressed.
No cutting or drilling, just stick 3 sensors on the outside of the tank, install the indicating panel up in the main toilet near the pump out switch, connect the system to* 12 V system and then calibrate the unit and Bob's your Uncle.
So far it is doing the job nicely and dead simple to fit.
I got mine from Defender, and must admit I knew nothing about them just bought it because it looked like what I wanted and with no cutting or drilling seemed simple.
will let you all know if I have any trouble with it in the future.
I installed something similar but a different brand.* The one on the water tank works fine.* The one on the holding tank is confused by solids clinging to the inside of the tank wall and only works if I clean the inside of the tank.
I don't do that very often.
|
*
|
|
|