Mrwesson
Senior Member
Cleaning up the bilge and found these wired up..
What am I looking at here?
- Thread starter Mrwesson
- Start date
The friendliest place on the web for anyone who enjoys boating.
If you have answers, please help by responding to the unanswered posts.
If you have answers, please help by responding to the unanswered posts.
RT Firefly
Enigma
Greetings,
Mr. W. Sonar transducer and temperature probe? That probe is a thru hull. May be a good time to see if the hole it came out of has been patched...Just sayin'.
Mr. W. Sonar transducer and temperature probe? That probe is a thru hull. May be a good time to see if the hole it came out of has been patched...Just sayin'.
Mrwesson
Senior Member
No holes so i'm going to go with lazy mechanic. It's been down there for over a year so I guess i'm a lazy owner too lol.
sdowney717
Guru
- Joined
- Jan 26, 2016
- Messages
- 2,264
- Location
- United States
- Vessel Name
- Old Glory
- Vessel Make
- 1970 Egg Harbor 37 extended salon model
The somar disc puck has been cut off from the brass threads. the other thing I dont recognize, but I suppose is inserted into an installed base in the hull. Removable to be cleaned off.
cool beans
Senior Member
The plastic insert is an old-school paddle wheel speedo. I can't tell if it's the unit itself or the dummy plug used to seal the hole when you pull the speedo for cleaning.
https://www.ebay.ie/itm/VDO-MARINE-...OGGEBER-LOGGE-50-KNOTEN-NEU-OVP-/122451961317
