Bill R.
Veteran Member
I have an wavering tachfor the Starboard engine.
The boat has twins diesels with dual stations.
Both upper and lower station Starboard tachs. jump around although above 1,900 RPM they are fine.
The port tach is o/k.
The Starboard tach was rebuilt with a new pickup installed at the time.
I have switched the feed to the Starboard tach to the port tach and the problem follows the feed from the alternator.
Some time ago i changed the regulator for the starboard alternator--no change.
I have started cleaning some of the connections but no fix so far.
Anyone with this issue ?
Thanks,
Bill
The boat has twins diesels with dual stations.
Both upper and lower station Starboard tachs. jump around although above 1,900 RPM they are fine.
The port tach is o/k.
The Starboard tach was rebuilt with a new pickup installed at the time.
I have switched the feed to the Starboard tach to the port tach and the problem follows the feed from the alternator.
Some time ago i changed the regulator for the starboard alternator--no change.
I have started cleaning some of the connections but no fix so far.
Anyone with this issue ?
Thanks,
Bill