Thread: Trolling Valves
View Single Post
Old 07-24-2018, 06:49 AM   #9
Moonzy1
Senior Member
 
City: Manasquan
Vessel Model: 2007 Henriques 35 Express
Join Date: Feb 2018
Posts: 115
Quote:
Originally Posted by ranger42c View Post
We have ZF 280-1A gears, and FWIW neither our gears nor our trolling valves are electronic. There's a separate cable running from manual Teleflex trolling valve controls at the helm...

Your 280s are electronic? Maybe the connection from helm controls feeds into
(or connects to) a harness that runs from gear levers to gears?

-Chris
Yes, my valves and shift control are all electronically controlled. No mechanical cables. There is a wire bundle that runs from the helm control head (levers) and a disconnected plug that is also connected to the trolling indicator light on the dash. All wired together. This must get connected to a harness someplace but there is no mating end visible anywhere. Info is sparse on the Internet for this as well.

I think there should be an interface that plugs into the stbd and port Electronic interface modules. They are easily accessible. Need a manual but hard to find.
Moonzy1 is offline   Reply With Quote