Marine Gas fitter - Redcliffe area

The friendliest place on the web for anyone who enjoys boating.
If you have answers, please help by responding to the unanswered posts.

shufti

Senior Member
Joined
Dec 3, 2013
Messages
199
Location
Australia
Vessel Name
Wine Down
Vessel Make
Riviera 35' FB
Hi All,


I'm absolutely amazed that I cannot seem to find a gas fitter to look at my boat in the redcliffe area. Pretty sure all I need is a gas (sniffer and control) panel replaced but I'm damned if I can find anyone who will do it. I'm stumped - can anyone help with a recommendation?


Cheers!
 
Hi All,

I'm absolutely amazed that I cannot seem to find a gas fitter to look at my boat in the redcliffe area. Pretty sure all I need is a gas (sniffer and control) panel replaced but I'm damned if I can find anyone who will do it. I'm stumped - can anyone help with a recommendation?


Cheers!
Come on down to Manly - I`m sure we have a few in the area.
 
Hi All,
I'm absolutely amazed that I cannot seem to find a gas fitter to look at my boat in the redcliffe area. Pretty sure all I need is a gas (sniffer and control) panel replaced but I'm damned if I can find anyone who will do it. I'm stumped - can anyone help with a recommendation?
Cheers!

A "gas fitter" specifically in the US is a plumber who is licensed to do gas connections. When you ask for a "gas fitter" you trigger a legal situation that no marine electrician or boatwright will want to touch.

It sounds like you may not need any gas connections touched. A good marine electrician should be able to diagnose your sniffer and control panel and replace anything that needs it without touching any gas connections. The only thing in that system that requires a gas connection is the solenoid at the LPG bottle. These do fail due to corrosion.

FWIW, the separate sniffer which is often located near the sole underneath the stove probably fails even more often and is very easy to replace.

David
 
Shufti,
Get on to face book and the Moreton Bay Cruisers page and make your request, you will get plenty of suggestions. I would help but am presently away OS so do not have info at hand.
 
There is an excellent marine electrician at Manly, named Wayne Love. He does all the marine elec stuff on my boat.

You could call him and see if he can help. If he cant, I am sure Wayne would know whom to recommend to you. Number is 0419131867.

Only hitch is you might have to bring you boat down to Manly for a day or two, but it is an easy cruise from Redcliffe.

H.
 
I used Kurt (link below) when I imported my boat. As you know, a gas certificate is required to register (or sell) a boat in Qld. Initially he was reluctant. But when I told him that I was aware of the Australian/New Zealand Standard, and had already installed the compliant line and gas locker while doing my refit in USA he was OK to do the work. He came up to Newport Marina where I was located at the time.

https://www.activegas.com.au/
 
Shufti, does it have to be a marine one? Land based gas tradesmen should around, I used a marine electrician who was qualified for house etc work.
We do have a marine expert gas installer/certifier here who used his great expertise to join together 2 incompatible threads, using tape and pink putty. As we discovered, down the track.
 
They just need to be Qld Gov licensed. Their a$$ is on the line if sh1t happens and gas is found to be the cause. Land tradies are fine, the trick is finding one who actually wants the work.
 
Back
Top Bottom