Trawlergal1990
Member
Wondering if anyone knows if it’s possible to lift the top of this stove top? Would like to clean under the top. Thanks much!
3 burner Princess stove top?
- Thread starter Trawlergal1990
- Start date
The friendliest place on the web for anyone who enjoys boating.
If you have answers, please help by responding to the unanswered posts.
If you have answers, please help by responding to the unanswered posts.
The Other Gary
Senior Member
- Joined
- Sep 18, 2016
- Messages
- 336
- Location
- Canada
- Vessel Name
- Adios Dinero
- Vessel Make
- Bayliner 3988 2 x 330 Cummins
Yes, it is hinged at the rear. You may need a knife or small flat blade screw driver to start it. Or pull the coils and insets and lift by the burner holes.
Capecodder
Senior Member
I have a gas-propane stove and so far I’ve not found the proper way to lift the top. Looks like an easy job... but I couldn’t find the directions online..
dhays
Guru
- Joined
- May 26, 2015
- Messages
- 9,045
- Location
- United States
- Vessel Name
- Kinship
- Vessel Make
- North Pacific 43
I did it last summer, but can’t for the life of me remember how. I’d need to be on the boat to look at it again.
sunchaser
Guru
- Joined
- Apr 9, 2008
- Messages
- 10,195
- Location
- usa
- Vessel Name
- sunchaser V
- Vessel Make
- DeFever 48 (sold)
On most models there are two retaining clips that need to be released. With a bright flashlight and very small screw driver it is easy enough to do. The clips are located on each front side.
OP
OP
Trawlergal1990
Member
Thanks much! We see the hinges in back and clips in front, just need to get the clips to release.
OP
OP
Trawlergal1990
Member
Yup, see them, just need to get enough angle to release the clips. Thanks!
OP
OP
Trawlergal1990
Member
LOL, thanks
OP
OP
Trawlergal1990
Member
Okiedokie, thanks!!
Similar threads
- Locked
