Honda 50 Hp spares

The friendliest place on the web for anyone who enjoys boating.
If you have answers, please help by responding to the unanswered posts.

Pieyed47

Senior Member
Joined
May 9, 2016
Messages
105
Location
United States
I am about ready to take a Nimble Nomad from WA to Alaska this spring and I was wondering if anyone could recommend what spares they would take with them for a Honda 50 hp engine with 300+ hours. This is the first Honda outboard I have had. Any insight will be most welcome.
Thanks JD
 
Spark plugs, propeller and shear pin, fuel filter, oil filter and oil.
 
I had a small Johnson that used to blow fuses occaisionally.....they are small and cheap enough that it might make sense to have a few if your motor has them.
 
How 'bout a 10hp motor mounted off to one side; just in case.
 
Ran one for years. Zero issues - typical Honda - do the PMs on schedule, feed it gas, it performs. I would take along Russell's list plus a wire coat hanger to rod out the "cooling water indicator" (p-tube). That tends to plug on occasion. Doesn't affect cooling, but it's the only indicator the operator has for cooling water flow.
 
I actually have my eye on an trailerable outboard powered boat if and when I want to replace our Albin-25 and would strongly consider a pair of smaller motors instead of a single.
 
Back
Top Bottom