Here you go. Note that all of the following are part numbers for the Aluminum anodes, not Zinc.
You'll need:
- (2) Prop nut anodes
- (4) shaft anodes (I have 2 per shaft on my boat)
- (4) thruster anodes (one for each side of the bow thruster, and one for each side of the stern thruster -- if you have a stern thruster)
- (2) rudder anodes that attach to the trim tabs, not to the rudders (my boat does not have rudder anodes)
- (1) big anode for the transom
Here are the items to order.
NOTE: You won't find the 50mm prop and shaft anode parts on their website. Just send them an email and they can add them to the order for you.
(2) CMAN250A Martyr Aluminum 50mm Prop Nut Anodes
(4) CMX50AL Martyr Aluminum Streamlined Shaft Anode to fit 50mm shaft
(4)
TQ18500AL Aluminum Anode Quick BTQ/BTR Thruster w/ 185mm Tunnel
(2)
R-3A Rudder Aluminum Anode - 3-3/4" Dia. (for trim tabs)
(1)
DP-612A Aluminum Anode (for transom)
On my ST44, the rudders do not have any anodes as they are wired to the transom anode I believe. If your ST44 has rudder anodes, you can just order 2 more of the R-3A's for the rudders.
Hope this helps.
Mike