View Single Post
Old 01-29-2018, 04:22 PM   #34
capeshore
Veteran Member
 
City: Boston Area
Join Date: Jul 2017
Posts: 54
Quote:
Originally Posted by Seanair View Post
I wouldn't hesitate to use it, as long as it will absorb some resin.

I used a similar material; Core-Cell A500 .75 thickness
Triple Cut - but it was considerable more expensive so you may have found a good alternative.
Thanks, was going to ask you what thickness you used. I see on the bow of mine it was .75 but with adding some glass to as you or someone else said to the very thin under core layer wasn't sure if I should go 1/2 inch core. The base layer of glass is so thin..i poked through a little in two spots. Looked quick at the A500 but I will need it perforated for the bow and gunnel work which I didn't see off first look but I/m sure they have it.. no matter it's a nice option, thanks
capeshore is offline   Reply With Quote