Sea Strainer Gaskets

The friendliest place on the web for anyone who enjoys boating.
If you have answers, please help by responding to the unanswered posts.
See posts with no answers
D

dvarholy

Veteran Member
Joined
Sep 29, 2017
Messages
56
Location
US
Vessel Name
Julie
Vessel Make
Tradewinds 43
In need of replacement gaskets for all of my sea strainers, but don't know the make and model numbers. Unfortunately, the gaskets are listed by application and not by dimension. Is there any listing of such gaskets by size?

Daniel
 
Pictures? Someone here will recognize the brand and model. You can always use DIY gasket material or liquid gaskets.
 
For my Grocos I found the Racor 900 gasket O rings to be a good match.
 
Perko and Groco are two domestic manufacturers of sea strainers and gaskets are readily available for both. These are both very common sea strainers found on many boats

www.perko.com

https://www.groco.net/

:socool:
 

Attachments

  • groco 4.jpg
    groco 4.jpg
    7.8 KB · Views: 150
  • perko 493.jpg
    perko 493.jpg
    5.2 KB · Views: 147
Did the same for my very old Grocos. contact them by phone and they were extremely helpful both by phone and email. Sent pictures and they knew which model I had and what I needed. If by chance you have older Groco SV Series let me know as I believe I have some spares. If you post pictures the people in here will know what they are before you finish posting.
 
You must log in or register to reply here.

Similar threads

M
Sea Strainer Maintenance
Replies
5
Views
543
MilesD
M
P
Fuel Filter Gasket Challenge
Replies
5
Views
520
PNM
P
A
Raw Water Strainer Identification
Replies
3
Views
330
Pascall
Pascall
D
Fuel tank clean out gaskets - why not remove the center?
Replies
23
Views
2K
Delfin
Delfin
J
Seacock strainer
2
Replies
41
Views
3K
jimgram
J

Latest posts

Back
Top Bottom