View Single Post
Old 01-25-2018, 09:25 PM   #3
Lou_tribal
Guru
 
Lou_tribal's Avatar
 
City: Quebec
Vessel Name: Bleuvet
Vessel Model: Custom Built
Join Date: Jan 2016
Posts: 4,375
Exhaust line is as follow:
From manifold the elbow with injection is going down.
1 foot below there is a waterlock (if I am not mistaken, 10.5l capacity)
From the waterlock go straight to an elbow
The elbow it aroung 16 inches high
Then straight to the exhaust through hull
Then out a 90 degre to right and 2 feet to the exhaust flap and end. (Exhaust end is on port side)
Exhaust output is at around 3 inches above water when fully loaded.

L
Lou_tribal is offline   Reply With Quote