Hi,
Generally, the reason for smoking white smoke is the long-term use of the appliance with low heat output. The device has a golv pin that is surrounded by a metal screen that is flushed and can cause this smog. Also a low 12V / 24V voltage can cause the problem. When the appliance is switched off, it switches the ignition on the ignition, this purpose is to clean the screen so that the next time you start the appliance the screen will be clean and the fuel will ignite. The cause may also be the burning of the chamber damaged by the damage caused by time, the whole chamber must be replaced by a new one.
You can try to clean the Glow Pin Screen so that you light it up and when the pump starts pumping off the fuel cuts, about 30 seconds. Do this three four times and then try it normally. Loan Genny on or direct power and battery charger on top to maximize the voltage.
Eber and webasto, maby hurricane same system abouts?
NBs
https://www.butlertechnik.com/ebersp...21990113-p1242