Clemson101
Member
It is shameful for me to admit I toasted my impeller due to not re-opening the fresh water engine intake seacock after systems check. Luckily (I thought) I had a spare onboard. After removing the old impeller, I attempted to install the new one. I applied some Dawn to the new impeller but could not get it to engage more than half way. After 3 hours of making various attempts to twist the new impeller and checking for obstructions or if there was a "key" notch (not one I could find), I finally had to call Boat US. Attached a picture of the impeller housing. Any tricks to getting the new one back on?
My vessel is a 2015 Beneteau ST 34 with a 425 Hp Cummins Diesel model QSB6.7.
My vessel is a 2015 Beneteau ST 34 with a 425 Hp Cummins Diesel model QSB6.7.