Quote:
Originally Posted by RT Firefly
Greetings,
Mr. W. I understand you can buy clear non skid strips. What I did on our "small" boat was give the teak a thick coat of Cetol (I suppose you could use varnish) and while wet, spread plain sand over the top. I followed with a light coat of Cetol after drying and shaking off the excess sand. Not terribly long lived but most assuredly non skid. I "wrapped" the sand around the lip.
|
I've used both approaches and much prefer the sand or non.skid additives available.
The clear non.skid I used did not stand up on exterior. Started to peel after one season and the adhesive was a real bear to get off.