View Single Post
Old 06-26-2017, 11:54 PM   #17
C lectric
Guru
 
C lectric's Avatar
 
City: Gibsons, B.C., Canada
Vessel Name: Island Pride
Vessel Model: Palmer 32'
Join Date: Oct 2007
Posts: 4,414
Best is Use the top mounted dip tube. The bit remaining will not be noticed I built my own tank of Nytex and epoxy but I built in a floor depression that the dip tube sat into with about 1" clearance so almost empties 100%.

If you insist on using the bottom port then install a shut off valve. Failure to do so will result in you getting bitten when the pump fails and the tank is full.
C lectric is offline   Reply With Quote