petdoc4u
Senior Member
- Joined
- Jan 14, 2016
- Messages
- 134
- Location
- United States
- Vessel Name
- EXILE
- Vessel Make
- HANS CHRISTIAN TRAWLER
Does anyone know the part number(s) applicable to the water temperature sender for a Ford Lehman SP135 using VDO gauges. The sender is available from ADC however I would like to swap the sender out before the weekend and it would never reach me in time. I have heard that it is a common sender and need not be a VDO sender. Hope this is true.
Per infrared heat gun engine runs at 178 degrees. Gauge fluctuates between 180 and 200 degrees. Will creep up from 180 to 200 in 30 seconds then just fall
back to 180. Have checked connections. Also could be wiring or gauge but have been told this scenario likely due to faulty sender.
All help much appreciated.
Thanks,
-David
Per infrared heat gun engine runs at 178 degrees. Gauge fluctuates between 180 and 200 degrees. Will creep up from 180 to 200 in 30 seconds then just fall
back to 180. Have checked connections. Also could be wiring or gauge but have been told this scenario likely due to faulty sender.
All help much appreciated.
Thanks,
-David