View Single Post
Old 04-23-2017, 06:27 PM   #3
Lou_tribal
Guru
 
Lou_tribal's Avatar
 
City: Quebec
Vessel Name: Bleuvet
Vessel Model: Custom Built
Join Date: Jan 2016
Posts: 4,375
Quote:
Originally Posted by RT Firefly View Post
Greetings,
Mr. L_t. You may want to use this stuff BUT keep in mind it IS rigid but prone to damage (It dents/squishes easily). IF you can install it in semi-protected areas it should last very well given you boat in fresh water.
https://www.homedepot.ca/en/home/p.s...000660659.html
You can get it in larger or smaller diameters with or without the collars...
Thank you my dear Mr RTF!
I looked at it but my vent is 3 inches diameter and found only 4 inchs diameter metallic ones. My conduits are in protected space between the outer hull and inner hull (well better say inner wood frame).
I guess there is no real issue using dryer plastic conduit as it is only air but thought it was a bit on the cheap side

L.
Lou_tribal is offline   Reply With Quote