View Single Post
Old 02-01-2017, 05:26 AM   #5
Lou_tribal
Guru
 
Lou_tribal's Avatar
 
City: Quebec
Vessel Name: Bleuvet
Vessel Model: Custom Built
Join Date: Jan 2016
Posts: 4,375
Quote:
Originally Posted by play n hooky View Post
Thanks folks
Did you remove the inside brass window with these tools? I apologize as I should have enclosed pictures
I removed approximately ten brass screws and window appears to be glued but unsure
It is laid up against teck panel so looking to minimize damage
Regards Dan
Pudget 37 trawler
I was joking Dan, if you use a sledge hammer or a crowbar I don't think you will minimize the damage!
Try to stuck a razor blade behind the inside brass frame to cut the sceallant. Hopefully it won't be something like 5200.
Lou_tribal is offline   Reply With Quote