Hello all, I am bringing the Rose around to Bayou Le batre around the end of February for her first trip to the yard in about 7 years. I would like to install a camera system in the engine room to monitor the status of the engines.
My question is, what is a good system and how many cameras do I need? Here is what I am thinking:
1. Oil sump, (pan under each motor to look for oil that shouldn't be there)
2. Front of engine, watch belts and oil coolers for transmission
3. Side of engine center where all the blower, more hoses and fuel lines are
4. Prop shaft, look for excessive water and also give you something to see
5. Exhaust elbow before going up into chase.
That's 10, also I would like them all on a split screen. What is a good cheep system that can handle about 16 cameras?
My question is, what is a good system and how many cameras do I need? Here is what I am thinking:
1. Oil sump, (pan under each motor to look for oil that shouldn't be there)
2. Front of engine, watch belts and oil coolers for transmission
3. Side of engine center where all the blower, more hoses and fuel lines are
4. Prop shaft, look for excessive water and also give you something to see
5. Exhaust elbow before going up into chase.
That's 10, also I would like them all on a split screen. What is a good cheep system that can handle about 16 cameras?