- Joined
- Mar 17, 2012
- Messages
- 4,279
- Location
- Australia
- Vessel Name
- Insequent
- Vessel Make
- Ocean Alexander 50 Mk I
We were heading out for a few days after Xmas and before leaving the entrance channel to Port of Brisbane the port engine gave an alarm, requiring engine shutdown. We continued over to the Sandhills anchorage on one engine OK.
The error code is SPN 629 FMI 19 - ECU not receiving message from pump. Manual says call service dealer, which I will do when they re-open their office after the Xmas-New Year holiday break. Is there anything an owner/user can do in the meantime?
I did unplug the loom to the ECU and also to the injector pump and reconnect them, but there does not seem to be any change. I am guessing that there is a failure of the injector pump sensor, and that I will just need to wait for the dealer to re-open. We will return to the marina this afternoon on one engine. I will definitely need slack tide to enter my berth, but it should be manageable with only light winds forecast.
The error code is SPN 629 FMI 19 - ECU not receiving message from pump. Manual says call service dealer, which I will do when they re-open their office after the Xmas-New Year holiday break. Is there anything an owner/user can do in the meantime?
I did unplug the loom to the ECU and also to the injector pump and reconnect them, but there does not seem to be any change. I am guessing that there is a failure of the injector pump sensor, and that I will just need to wait for the dealer to re-open. We will return to the marina this afternoon on one engine. I will definitely need slack tide to enter my berth, but it should be manageable with only light winds forecast.