Thread: Radar
View Single Post
Old 12-31-2016, 10:35 AM   #19
Heron
Guru
 
Heron's Avatar
 
City: Cypress Landing Marina (NC)
Country: USA
Vessel Name: Heron (2)
Vessel Model: '88 Cape Dory 28 Flybridge #115
Join Date: Nov 2014
Posts: 1,303
Quote:
Originally Posted by Lou_tribal View Post
This is exactly what I was about to write. Except if you have a cablel with dozen of thin wire that could be a real pain to solder, cut the connector, pass the cable and put it back. Just be careful not to cut it right on the connector to keep som cable length to be able to solder it.
Quote:
Originally Posted by Bob Cofer View Post
You don't have to re solder the cable. Garmin sells a replacement connector for just a few dollars.
You can buy a simple CAT5 crimper and plugs for a few bucks. NO NEED to solder anything. IT guys use these all the time.

https://www.amazon.com/s/ref=nb_sb_s...3Acat5+crimper
__________________
Steve
Heron is offline   Reply With Quote