View Single Post
Old 09-14-2016, 04:44 PM   #6
dhays
Guru
 
dhays's Avatar
 
City: Gig Harbor
Vessel Name: Kinship
Vessel Model: North Pacific 43
Join Date: May 2015
Posts: 9,046
Quote:
Originally Posted by sum escape View Post
Off to the hardware store. Found a small crack in the fitting for the vent line to the holding tank. Problem identified, now just need to source the fitting and be a contortionist to replace it! Thanks all.
That could do it. The rag test will just tell you if the hoses are permeated. If there is an air leak, then you are venting some of the displaced air from the flush into your boat. Not a permanent fix, but I would use some duct tape around the cracked fitting to see if that eliminates the odor issue.
__________________
Regards,

Dave
SPOT page
dhays is offline   Reply With Quote