View Single Post
Old 07-26-2011, 12:31 PM   #1
zappi
Newbie
 
Join Date: Dec 2008
Posts: 1
Raymarine - DSM 30 depth sounder loosing bottom.

I have networked E80's with a DSM 30 reading off of an inhaul transducer. It is networked through a Highspeed switch. On this network is Radar, GPS, and an auto pilot with a wireless remote. The system works good. Untill, while waiting for reduced current*at Seymour Narrows, I picked up my anchor, and while motoring out I noticed my Raymarine chartplotter showed no bottom. I didn't notice this right away because I have an independent Lowrance depth sounder I use also.

*

So the Raymarine Chart ploter shows no bottom even though the little icon shows the transponder is working. But when I get to Campell river later on it works. But it works only in shallow depths under 60 feet.

Has any one experienced Raymarine sounder problems when working with the Raymarine E series. My chartplotters have been updated to version 5.52 and my DSM 30 to version 4.11.

*

*
zappi is offline   Reply With Quote