New....HELP!

The friendliest place on the web for anyone who enjoys boating.
If you have answers, please help by responding to the unanswered posts.

Cbrooks1976

Member
Joined
Jul 9, 2015
Messages
6
Location
United States
I'm shopping my heart out, with my wife's list of demands in hand. Having looked at just about every boat afloat, I really like the Albin 36. I've even seen a few long in the tooth Mainship 34s that I'm temped to spruce up and stuff a larger engine in. Kind of a super trawler/sport fish hybrid. But the boat with the lay out that's the absolute best for me is a Marine Trader 34 Double Cabin.

There are other boats that feel better built, are faster or have a particular feature I like. But the foot print of the MT34 is literally what I'd design if I were starting from scratch.
The problem is I'm not very educated on Marine Trader.
I'm an odd one, I like older, more classic boats.
If I have the cash in hand to buy the latest and greatest trawler on the market I wouldn't. I've already factored in some refitting after I buy the boat. I just don't want to end up on a repair treadmill, run out of cash, and end up with the same number of usable trawler I have now.......zero :(

So what do you guys think?
I'm aware of the window issue, what else do I need to be looking out for?
I'm finding good looking boats for around $40k(79-85ish). A lot of them have new top side paint and teak looks reasonable. What else do I need to know about these boats?

Thanks in advance :thumb:
 
Last edited:
So what do you guys think?
I'm aware of the window issue, what else do I need to be looking out for?
I'm finding good looking boats for around $40k(79-85ish). A lot of them have new top side paint and teak looks reasonable. What else do I need to know about these boats?

Welcome to the hunt!

Marine Traders were built on a contract basis by a lot of different yards so quality will vary but the main things to look for are soft decks (leaky teak) and rusted black iron fuel tanks. Be prepared to replace the generator if it has a lot of hours on it (and you need it). Old electrical wiring can be a problem and dead ended wires. Most of the electronics will most likely need a refresh. Most MT's have Ford Lehman engines and if properly maintained, they are largely bullet proof and parts are available. If you find a boat that has been mostly in fresh water, it will likely be in much better condition but not always. For a boat that age, be sure to get a good survey and an engine survey.
 
Be VERY careful of the older trawlers from Taiwan (Albin, Marine Trader, etc) that are anything but at the upper end of the asking prices or you know the owner and the history of maintenance. Do NOT rely on a surveyor to give the info necessary to make an informed purchase.

Sure there could be a deal of the century out there...all I am saying is be careful as these boats on average, even when they look spectacular have not been upgraded or well maintained beyond the obvious.


The hard things like complete plumbing or electrical or complete fitting resealing probably have been ignored and are costly or time consuming to bring up to good standards. Really check them out thoroughly before you think you are getting a good deal.


Many rant about what a great boat they got only to find just a few years later what a rats nest of outdated wiring, delaminated/soft decks and large areas of rot, delaminated hulls from hydrolysis, repeatedly patch but never upgraded water systems, leaking windows beyond repair....on and on....
 
I would say your on the right track. Both Albin and MT are great boats. The MT's were unfairly bashed by the Grand Banks crowd back in the day but they were often built by the same craftsmen in the same yards. I wouldn't hesitate to buy one. Your already aware of the leaky windows and decks, the other issue they all have is rusted fuel tanks. No matter what it is or what shape it is in, sooner or later you will board one and you will just know it is the right one. I swear it is the boat that picks the owner.
 
Oops, Donsan & Psneeld beat me to it. Psneeld's remark "Do NOT rely on a surveyor to give the info necessary to make an informed purchase." sounds a bit unreasonable but is actually the best bit of advice your likely to get. Crawl around the bilges and look for yourself.
 
Psneeld's remark "Do NOT rely on a surveyor to give the info necessary to make an informed purchase." sounds a bit unreasonable but is actually the best bit of advice your likely to get. Crawl around the bilges and look for yourself.

Just to clarify and I am putting words into the mouth of other posters, the message here isn't "don't get a survey". The message is do not RELY on the survey by itself to make a decision. Be there with the surveyor and ask questions. If you notice something that wasn't checked, ask about it. Also keep in mind, the surveyor can't see or get to everything. Fuel tanks are often covered over with panels. It is important to find a very good surveyor. They all seem to use checklists nowadays but their experience can vary all over the place.
 
actually best to have someone with years of experience in vessel type and manufacture crawl around in the bilge.


most purchasers and possibly many surveyors are totally unaware of what problems may be present and know what to look for.


yes get a survey...check with your proposed insurance company and lender to see if that one is acceptable.


that was my point about not finding disasters about their boat till years after their purchase.


then.... too many are not very forthcoming about admitting that they bought something probably for more than they should have and they are suffering though the months or season of lost boating due to the oversight by them or the surveyor.
 
Last edited:
As a owner of a MT couple things I can recommend

1. my surveyor suggest we be inside on a very heavy rain day to find the leaky windows and we did

2. the dead end wiring issue is true but can be a easy fix but some of the yards used low quality panels and the breakers would go bad not a big issue if you can find the breakers

3. On larger MTs the bilge through hulls in many cases were under sized

this all being said I love my old MT
 
Good stuff guys!

I think at this point I'm going to just assume the boat has leaky windows and start there, if I end up with a Marine Trader. If I fix/replace the windows and didn't need to, at least I'll have new windows ;)

I'm a little nervous about the fuel tanks.....actually very nervous.
Has anyone done theirs?
If I'm forced to replace the tank I have a guy who'll make a custom tank for me. If I could carry more fuel on bard that would be a silver lining, and take some of the sting out of the repair.

The wire issue is the least challenging for me.
I have a background in chasing wires and crawling through tight spaces.
Don't particularly want to, but it's doable.

I guess if I wanted a maintenance free boat I should have stuck with my kayak :D
It's a little perplexing how folks who own other brand boats bad mouth Marine Trader while MT owners don't really reflect their criticism. I'm starting to think it's the boat equivalent of Chevy vs Ford.

If anyone here has taken on any of the about jobs feel free to expound on your experience.
And if any MT owners want to show off their boats area Tampa Bay, beers on me:D
 
I cut out 2-200 gal tanks with a small Rigid (home depot brand) one handed recip saw.


Bottoms were full of gunk but fuel and fuel filters always perfect...probably because I like calm seas.


Replaced with 2-58 gal Moeller poly tanks..love being able to see into them and empty them at the end of the season till my following years trip to/from Florida.


100 Gallons gets me from Jersey to Norfolk no problem...about 300 miles with plenty of reserve. I could have put in more tanks...but love the storage and 300 miles per leg for now is good enough.


Messy job but not too hard on a single engine...twins a different story.
 
Shameless plug for my well maintained Mainship 34 that doesn't have any of the issues mentioned above. Rewired, solid decks, windows don't leak, good fuel tanks, stored in covered docks on fresh water, 800 mile range, priced to move below your max budget, etc. See the classified section...

But Marine Trader's are nice, too. :blush:
 
Shameless plug for my well maintained Mainship 34 that doesn't have any of the issues mentioned above. Rewired, solid decks, windows don't leak, good fuel tanks, stored in covered docks on fresh water, 800 mile range, priced to move below your max budget, etc. See the classified section...

But Marine Trader's are nice, too. :blush:

If it wasn't for the need for another cabin I'd already have a Mainship 34.
Found one for sale awhile back re-powered with a brand new Caterpillar.
It did 20knots (GPS) and could still get around 2.5gph at 8 knots.
My kids (11 and 16) will share a V berth, but not a sofa. So no Mainship for me.
I like the layout of the Maniship 36 dub cab, but the few I looked at were all gas powered. And the engine bays looked like they haven't been opened since the boat left the factory.
If new model Mainships weren't so ugly(IMHO) I'd consider one. But I couldn't spend that much money on something I didn't want to look at.
 
I had a 1979 Albin 33. I could not tell it apart from a Marine Trader of the same size and vintage. I always suspected that they were built in the same yard. Same intricate teak carvings on the inside and teak decks and window frames on the outside. It you like to do teak these are the boats for you. I few years later my suspicions were partially confirmed when I witnessed molds being rolled around in the streets in the middle of the night in Kaohsiung, Taiwan. One factory would lay up a hull and then move the mold down the street to another builder.

My boat was tough as a tank but leaked like a sieve especially over the master bed and down the bulkhead under the window. I think that the screws holding the teak deck down rusted out leaving holes that leaked.
 
Just purchased a MT34 last month.Moved it from SW Fl. to the Chesapeake-no problems. Like was said,lot's of dead wires,not an issue will pull them out little by little. Electronics needed up dating but again no real big deal. Luckly no leaking windows,all aluminum. No teak decks so no soft spots.Fuel tanks seem to be in great shape,I like that the fill do not go directly into the top of the tanks but rather into the sides with an elbow. Any water that might seep thru the deck will not end up on the top of the tanks. So all in all no real big issues just the usual boat stuff.There are some crazing spots on the deck but I'll address that when she gets hauled this fall. Feel we got a good deal on the boat and left us money to do what needed to be done.
 
If it wasn't for the need for another cabin I'd already have a Mainship 34.
Found one for sale awhile back re-powered with a brand new Caterpillar.
It did 20knots (GPS) and could still get around 2.5gph at 8 knots.
My kids (11 and 16) will share a V berth, but not a sofa. So no Mainship for me.
I like the layout of the Maniship 36 dub cab, but the few I looked at were all gas powered. And the engine bays looked like they haven't been opened since the boat left the factory.
If new model Mainships weren't so ugly(IMHO) I'd consider one. But I couldn't spend that much money on something I didn't want to look at.

We have the same issues, but my kids can share the couch and better like it...mama and daddy get the v berth. Agree with you on the larger, gas powered Mainships. We solved out problem with a 46 Jefferson. Good luck on your search.
 
Hey Cbrooks

Welcome aboard. Good to have you around. Good hunt
 
d
The MT's were unfairly bashed by the Grand Banks crowd back in the day but they were often built by the same craftsmen in the same yards.

Totally inaccurate. Wood Grand Banks were built in Anerican Matine's yard in Kowloon, Hong Kong and fiberglass Grand Banks were built in American Marine's Singapore yard until Grand Banks construction was fairly recently moved across the Strait to the company's newer yard in Malaysia. Grand Banks were never made in Taiwan and the folks who built Grand Banks boats never made Marine Traders or any of the other so-called "Taiwan Trawlers."

Probably the most important contribution American Marine brought to this type of recreational boat manufacturing was consistency of (high) quality across the entire Grand Banks line and from boat to boat. Something that was very much absent among most of the the Taiwan boat builders in the 70s and 80s.
 
Last edited:
I must have mixed GB up with one of the other brands from an article I read. I defer to your apparent knowledge on the subject and retract the "latter" part of my statement.
 
I must have mixed GB up with one of the other brands from an article I read.

That's okay. A lot of people believe that because brands like Grand Banks and Island Gypsy were built in Asia they were built in Taiwan. Easy to believe since so many brands were turned out in Taiwan from many family-owned boatyards that were there at the time.

But the Grand Banks and Island Gypsy lines of boats both originated in Hong Kong. Kong & Halverson (the "Kong" first worked at American Marine and was involved in the creation of the Grand Banks line before leaving and teaming up with Halverson) created the Island Gypsy line of diesel cruisers.

American Marine closed their Hong Kong yard in the early 70s and moved all production to Singapore. I'm not sure what Kong & Halverson did in terms of yard location.
 
That's okay. A lot of people believe that because brands like Grand Banks and Island Gypsy were built in Asia they were built in Taiwan. Easy to believe since so many brands were turned out in Taiwan from many family-owned boatyards that were there at the time.

But the Grand Banks and Island Gypsy lines of boats both originated in Hong Kong. Kong & Halverson (the "Kong" first worked at American Marine and was involved in the creation of the Grand Banks line before leaving and teaming up with Halverson) created the Island Gypsy line of diesel cruisers.

American Marine closed their Hong Kong yard in the early 70s and moved all production to Singapore. I'm not sure what Kong & Halverson did in terms of yard location.

Interesting.
Do you have any thoughts on the Marine Traders? late 70s early to late 80s?
 
I think at this point I'm going to just assume the boat has leaky windows and start there, if I end up with a Marine Trader. If I fix/replace the windows and didn't need to, at least I'll have new windows ;)

I'm a little nervous about the fuel tanks.....actually very nervous.
Has anyone done theirs?
If I'm forced to replace the tank I have a guy who'll make a custom tank for me. If I could carry more fuel on bard that would be a silver lining, and take some of the sting out of the repair.

The wire issue is the least challenging for me.
I have a background in chasing wires and crawling through tight spaces.
Don't particularly want to, but it's doable.

I guess if I wanted a maintenance free boat I should have stuck with my kayak :D
It's a little perplexing how folks who own other brand boats bad mouth Marine Trader while MT owners don't really reflect their criticism. I'm starting to think it's the boat equivalent of Chevy vs Ford.

If anyone here has taken on any of the about jobs feel free to expound on your experience.
And if any MT owners want to show off their boats area Tampa Bay, beers on me:D

Just a little free advice that I feel qualified to give having owned a Marine Trader 36 for 3 1/2 years now. When we bought the boat it had 14 water leaks. It did not take to long to track them down and fix them (some easier than others). I replaced all plumbing and all 120 volt wiring and am still working on the 12 volt wiring. We have done more upgrades than I could probably remember at this hour. We bought the boat for $20K and have put another $30K plus at least a thousand hours of labor into it. She is a good boat now but set for 8 years before we got her so she had a lot of deffered maintenance.

If you buy an old boat for $20K - $40K plan on another 20K - 40K to bring her back to life and truly make her your own. If you are good with your hands and enjoy working on an old boat it can be very rewarding. If you don't work with your hands an old boat can be a money pit and your worst nightmare.

I enjoy working on the boat and realize we have more in her than we could sell her for, but we don't care, it is our home and we love it.

As far as the reputation of Marine Traders, it is well deserved. I have found so many things that I just shake my head at. For example the flybidge drain is directly over the shore power outlet. It could not have been planned any worse. The window instalation looks like an eight grader designed it. That beening said all things can be fixed. We have made vast improvements on our boat. Don't get me wrong MTs are decent boats if they have been cared for and upgraded, but go in with your eyes wide open and take someone who has owned one for awhile with you to look at it.

I have a friend in Fort Meyers that has a MT 44 with a single 120 Lehman for sale. PM me if you want his contact info.
 
Last edited:
Interesting.
Do you have any thoughts on the Marine Traders? late 70s early to late 80s?

Sorry, but what I know about Marine Traders wouldn't cover the head of a pin and I don't want to simply pass on what I've heard along the way from people whose credibility is unknown to me about what's good and bad about these boats.

There are people on this forum who own or have had experience with Marine Traders and I'm sure at least some of them will speak up here about their experiences.

What I can offer is this: There is a pretty good Passagemaker article on "Taiwanese Trawlers," the generic name used for the large number of cruisers produced in Taiwan during the 70s and 80s. These include makes like CHB, Puget Trawler, Marine Trader, Roughwater, Albin etc. The article talks about the good and bad aspects of these boats. http://www.baris.net/boats/lf3/pdf/a...e_trawlers.pdf

Perhaps this will serve as at least one data point as you learn more about this brand.
 
Last edited:
Just a little free advice that I feel qualified to give having owned a Marine Trader 36 for 3 1/2 years now. When we bought the boat it had 14 water leaks. It did not take to long to track them down and fix them (some easier than others). I replaced all plumbing and all 120 volt wiring and am still working on the 12 volt wiring. We have done more upgrades than I could probably remember at this hour. We bought the boat for $20K and have put another $30K plus at least a thousand hours of labor into it. She is a good boat now but set for 8 years before we got her so she had a lot of deffered maintenance.

If you buy an old boat for $20K - $40K plan on another 20K - 40K to bring her back to life and truly make her your own. If you are good with your hands and enjoy working on an old boat it can be very rewarding. If you don't work with your hands an old boat can be a money pit and your worst nightmare.

I enjoy working on the boat and realize we have more in her than we could sell her for, but we don't care, it is our home and we love it.

As far as the reputation of Marine Traders, it is well deserved. I have found so many things that I just shake my head at. For example the flybidge drain is directly over the shore power outlet. It could not have been planned any worse. The window instalation looks like an eight grader designed it. That beening said all things can be fixed. We have made vast improvements on our boat. Don't get me wrong MTs are decent boats if they have been cared for and upgraded, but go in with your eyes wide open and take someone who has owned one for awhile with you to look at it.

I have a friend in Fort Meyers that has a MT 44 with a single 120 Lehman for sale. PM me if you want his contact info.

Thanks for the info, it was worth a lot more than free.
Maybe I should find a boat that's been worked over already, the math is starting to break down a little bit. I restored old cars and built motorcycles for several years, so doing the work myself is possible with some guidance.
I wouldn't presume to be an expert, but the skills should cross over well.
The issue is a $20k boat + another $20-40K puts me in range of more choices.

And I would like to learn more about your buddy's boat. It might be a little early but if he's showing it I'd like to come down and have a look. I did know they made a single engine 44. 10" more than I have been looking at and I bet the rage is pretty good.
 
cbrooks1976

I just sent you a pm.
 
I think at this point I'm going to just assume the boat has leaky windows and start there, if I end up with a Marine Trader. If I fix/replace the windows and didn't need to, at least I'll have new windows ;)

I'm a little nervous about the fuel tanks.....actually very nervous.
Has anyone done theirs?
If I'm forced to replace the tank I have a guy who'll make a custom tank for me. If I could carry more fuel on bard that would be a silver lining, and take some of the sting out of the repair.

The wire issue is the least challenging for me.
I have a background in chasing wires and crawling through tight spaces.
Don't particularly want to, but it's doable.

I guess if I wanted a maintenance free boat I should have stuck with my kayak :D
It's a little perplexing how folks who own other brand boats bad mouth Marine Trader while MT owners don't really reflect their criticism. I'm starting to think it's the boat equivalent of Chevy vs Ford.

If anyone here has taken on any of the about jobs feel free to expound on your experience.
And if any MT owners want to show off their boats area Tampa Bay, beers on me:D

Although grew up in St petersburg my MT is in Sarasota this October the windows are coming out and I plan to have new ones made
by these guys

Horizontal Sliding, Top Hinged, Medium Duty Fixed, Heavy Duty Fixed Windows, Acrylic Windscreens

I have seen some of there work here at the marina

bring a few beers and we can sit on the back deck and brainstorm
 
The key to the entire process is, can you do all the work on an old TT yourself or do you have to pay someone? It may be simple, the windows leak. Or, more likely, the windows leak and it has rotted out the cheesy old pallet wood they used in the sidewalls and you will have to rebuild the house. Or, that leak in the v-berth might just be a leak, or, it got under the teak decking and rotted the crap wood they used to build the sub deck and you will have to take off all the teak, the top layer of fibreglass, put in new marine ply subdeck, fibreglass over and put down a new deck surface. And the cabin finish teak that got wet will have to be tossed because it has mildew behind.

That is the worst case scenario I found when I was looking for TTs and out of about 10 samples, I would not have bought any of them. There are lots of them around, however and many owners are very happy with them. They vary widely in quality. The interior finish is outstanding and the finish carpentry can't be duplicated by any of the modern builders. They look terrific when the bright work is all done and it's the sort of boat that you have to stop and have just one more look when you put her away for the night.

Reread the cautions from the other posters before mine and don't even look twice if you are not "handy." Doubling (or more) the purchase cost in repairs and replacements is very common in old boats, one of the reasons they should be cheap if they have been neglected but the saving grace is that the money is spend over a few years, not one cheque. You have heard the expression "...boat dollars" (thousands)?

If the one you are looking at has its original teak decks still, be afraid, very afraid.
 
My understanding is Island Gypsy boats were finished in Hong Kong following construction in mainland China. It seemed too early to me, but unreliable memory says I got the info from Mark Halverson.
 
Marine traders

I own a 1981 Marine Trader 41, 42' LOA and identical, inside and out, as far as I can determine to a Defever 41. I have owned it since 2007, and old trawlers are maintenance intensive. You should have a full winter cover or a covered berth.

My advice is to thoroughly examine the deck by looking in the interior for any water marks. Is any paint lifting. Check out the interior lights. Take them apart and see if there has ever been any water ingress. In the lazerete there should be access to the underside of the deck. See if there has every been water ingress. If the deck has been done, ask for pictures of the work or the yard where it was done. Of course if you can feel soft wood or smell wood rot you should simply avoid the boat or at least be prepared for a herculean task.

As for electrical, see if if there are labels on the actual wiring, turn every thing on at once and see if you can blow a fuse, ask for a wiring diagram. These are all very simple things you can do prior to you getting a surveyor.
 
Last edited:
Back
Top Bottom