View Single Post
Old 06-02-2015, 08:35 AM   #4
Marlinmike
Guru
 
City: LI or Fla
Join Date: Jul 2013
Posts: 1,148
The key is what is stated below, you need to finish off with a clear coat otherwise it will turn into what you have, I would suggest using a random orbital sander to get some of the grain off from power washing and teak cleaner, the smoother the surface the less the dirt collects.

Quote:
Originally Posted by dwhatty View Post
The Cetol on our cap rails lasted 7 years with an annual maintenance coat. Last fall they needed to be refurbished.

Wooded them. Then two coats of Cetol Natural Teak base followed by three coats of Cetol Gloss. Considered that the minimum for initial coating.

Will put a another maintenance coat on them this year.
Marlinmike is offline   Reply With Quote