Originally Posted by caltexflanc
I got thrown off because the specs and pics indicated a female terminal on the battery; so you thread a stud in there?
Yes there is are female threads on the top of the battery under a safety ABS cap it has a knurled fitting about .7" in diameter with an Allen key used to remove or tighten it. These hold L backets that can be removed that have 1/4" threaded posts on the front side of the battery. The 1/4" threaded posts would only be good for a medium/ low current ( like my Balmar Battery Smartmeter) connections these studs come with black and red protection caps.
It's a bit difficult to describe.