im in need of a gooseneck for my trawler. the boom and riggings were missing when I bought the boat. only the mast was onboard. I found a nice wood boom off a old sailboat that will fit perfectally. I can make the gooseneck at my shop but were busy right now so Id rather just buy one. I searched the internet for awhile today with no luck. the mast is about 7 inch dia and the boom is about 3.5 or 4 od. any help would be great
Gooseneck
- Thread starter albin43
- Start date
The friendliest place on the web for anyone who enjoys boating.
If you have answers, please help by responding to the unanswered posts.
If you have answers, please help by responding to the unanswered posts.
Capn Chuck
Guru
- Joined
- Jan 20, 2009
- Messages
- 897
You should be able to buy something workable at almost any sailboat hardware supplier since this is pretty common. You won't likely find it at Worst Marine or Defender. Chuck
-- Edited by Capn Chuck on Wednesday 12th of May 2010 12:41:01 PM
-- Edited by Capn Chuck on Wednesday 12th of May 2010 12:41:01 PM
JD
Guru
Here are a couple of sailboat riggers:
You might try, http://www.riggingonly.com/Default.htm*or http://www.rigrite.com/
Another one to try is http://garhauermarine.com/* , they make a lot of custom stuff and are easy to work with.
You might try, http://www.riggingonly.com/Default.htm*or http://www.rigrite.com/
Another one to try is http://garhauermarine.com/* , they make a lot of custom stuff and are easy to work with.
Similar threads
