Originally Posted by PeterB40
I saw a couple of things on the right side that might have been fuses, but would have needed neesle-nosed pliers to try extracting in the very cramped un der-deck location, and a not-so-supple 83 yr.-old bod!
I did disconnect the 48V at the lithium batt. with Victron switch off, waited a couple of minutes and re-connected. Turning the unit switch back on, all four LED lights lit up and stayed lit for both the charger and inverter - no flashing. This finding is not covered in the manual's extensive list of error codes. And still no function from charger or inverter - no 120AC with either dock mains plugged or un-plugged. Time to give Victron a call...
Dumb question. It's not this is it? It may have tripped and not be visible? At least it's easier to get to than the bilge.