Trawler Forum - View Single Post

Comodave · 03-19-2023, 02:35 PM

Our last boat had Lehman SP225s in it. I built a crane in the salon and lifted each engine, 1 per winter, up out of the engine room and stacked it over the other engine to do work in the engine room. It took 3 of us about an hour and a half to actually do the pulling of each engine and about the same when we put them back in. I did not take them out of the salon, that would have been a huge job on that boat since there wasn’t a door from the salon to the side decks.

03-19-2023, 02:35 PM	#20
Comodave Moderator Emeritus City: Au Gres, MI Vessel Name: Black Dog Vessel Model: Formula 41PC Join Date: Jul 2015 Posts: 19,122	Our last boat had Lehman SP225s in it. I built a crane in the salon and lifted each engine, 1 per winter, up out of the engine room and stacked it over the other engine to do work in the engine room. It took 3 of us about an hour and a half to actually do the pulling of each engine and about the same when we put them back in. I did not take them out of the salon, that would have been a huge job on that boat since there wasn’t a door from the salon to the side decks. __________________ Boat Nut: If you are one there is no explanation necessary. If you aren’t one, there is no explanation possible.