auto pilot MS 350/390
happy holidays everyone,
I have a 98 MS 350 with a yanmar 315 single. I had a GHC 20 installed 5 years ago with the hydraulics(GHP reactor smartpump) installed in the lower helm area below the nav panel. Very tight area to work in connecting hoses. We installed the compass in the closet forward wall on the port side as close to boat centerline as possible. Easy run for cable management back to helm station. We opted not to install the shadow drive which would require a lot more labor but has worked out great. Still easy to override A/P and can put in standby mode. Very happy with the setup and would definitely do this again. I would get a GHC remote to use on the upper helm and around the boat. If you can buy a garmin G2 vision hd for your area, it's a whole new world with it
Happy new year
J.T.
|