[Turning Point]

Originally Posted by koliver

When I changed to a Smart Plug, at the boat to shore cord connection, I saved the old Marinco boat end. Then when my Smart failed, which the original design was prone to do, I swapped back to the Marinco connection, used my spare that still has its original Marinco end and contacted Smart for a replacement. That arrived within a couple of weeks, so I again did the swap, and now have the second generation Smart, without the prone to failure issue of the first. I also still have the old Marinco unit.
Scot, change to the Smart Plug, get the second generation unit, and save the old Marinco unit. Check with your insurer. Some offer a rebate if you change to a Smart. Mine did, though that was several years ago.

Koliver,
I had an early 50amp Smart Plug fail. I hadn’t heard about issues. Is there information available on that?
Thx