View Single Post
Old 09-18-2022, 11:01 AM   #2
Comodave
Moderator Emeritus
 
Comodave's Avatar
 
City: Au Gres, MI
Vessel Name: Black Dog
Vessel Model: Formula 41PC
Join Date: Jul 2015
Posts: 21,191
Have you checked the inlet in question for heat damage? It can happen easily due to corrosion on the contacts and then the added resistance causes the connection to heat up. Simple solution is to replace the inlet. If the inlet looks good then get your multi meter out and ohm the 3 wires from the inlet to the panel inside and make sure all 3 have continuity. It could be the selector switch that lets you choose between bow inlets and stern inlets.
__________________
Boat Nut:
If you are one there is no explanation necessary.
If you aren’t one, there is no explanation possible.
Comodave is offline   Reply With Quote