cardude01
Guru
- Joined
- Nov 26, 2012
- Messages
- 5,290
- Location
- USA
- Vessel Name
- Bijou
- Vessel Make
- 2008 Island Packet PY/SP
My pressure pump for the sink/shower recently went out, and I don’t seem to have power at the wire to the pump now. I testing it with my multimeter between the red and yellow, but I get no voltage. The pump breaker is on and there is power at the breaker. Am I missing something? I don’t see an inline fuse anywhere, and I can’t see the entire wire run back to the breaker. It’s a 50amp breaker.