View Single Post
Old 07-19-2022, 05:06 PM   #56
Simi 60
Guru
 
Simi 60's Avatar
 
City: Queensland
Vessel Model: Milkraft 60 converted timber prawn trawler
Join Date: Jul 2016
Posts: 5,482
Post

Quote:
Originally Posted by Tidahapah View Post
I was in the work shop the other day and saw those being fabricated. Didn't realise they were for you otherwise I would have written on them.
Waiting to hear how they go.
Attachment point at roof is my concern

Every 400mm there is a 75 X 75 laminated deck beam running full width sticking out 550mm from cabin side

I chose the one on a bulkhead and also about 600 mm from a supporting upright

Drilled a 25 mm hole through the beam about 50mm from outer end, filled with epoxy glue, drilled it back out and screwed in a 12mm stainless eyebolt with backing plate.

Hoping the nylon double braid will stretch enough to take any shock loads out.


Quote:
My magmas on Tidahapah were good once I added bit of extra weight.
These have got no shortage of weight.
Hoping I can get them out just using the trip line
Attached Thumbnails
IMG_20220720_080728_662_1.jpg  
__________________
Everything on a boat is broken, you just don't know it yet
Full time cruising is repairing boats in exotic locations
Simi 60 is offline   Reply With Quote