Croix du Sud
Veteran Member
- Joined
- Jul 23, 2021
- Messages
- 40
- Vessel Name
- Croix du Sud
- Vessel Make
- Grand Banks 36 Europa # 842
Sliding door lock
- Thread starter Croix du Sud
- Start date
The friendliest place on the web for anyone who enjoys boating.
If you have answers, please help by responding to the unanswered posts.
If you have answers, please help by responding to the unanswered posts.
MVSeafarer
Member
- Joined
- Apr 22, 2022
- Messages
- 18
- Vessel Name
- Seafarer
- Vessel Make
- 1980 49 Grand Banks Classic
Same lock as on my fathers 1978/9 (I think) 42EU.
OP
OP
Croix du Sud
Veteran Member
- Joined
- Jul 23, 2021
- Messages
- 40
- Vessel Name
- Croix du Sud
- Vessel Make
- Grand Banks 36 Europa # 842
Thanks. It’s what I thought.
Regards
Jean L
Regards
Jean L
Choices
Guru
- Joined
- Apr 16, 2018
- Messages
- 898
- Location
- Montgomery, Tx
- Vessel Name
- Choices
- Vessel Make
- 36 Grand Banks Europa
Mine is a 92, not the same.
But when refinishing the door I thought real hard about making the bottom panel glass, like the top.
The newer boats have this and I like the look. May still do it.
I also replaced the rollers with Delrin blocks, and cut each side a different depth for the groove.
Works great, door slides almost too easy.
Pictures on my blog, grandbankschoices.
But when refinishing the door I thought real hard about making the bottom panel glass, like the top.
The newer boats have this and I like the look. May still do it.
I also replaced the rollers with Delrin blocks, and cut each side a different depth for the groove.
Works great, door slides almost too easy.
Pictures on my blog, grandbankschoices.
OP
OP
Croix du Sud
Veteran Member
- Joined
- Jul 23, 2021
- Messages
- 40
- Vessel Name
- Croix du Sud
- Vessel Make
- Grand Banks 36 Europa # 842
Thanks. I don't consider works that extensive ! I only plan the lock replacement but where to find this part ?
All the best
Jean L
All the best
Jean L
wkearney99
Guru
- Joined
- Feb 17, 2018
- Messages
- 2,164
- Location
- USA
- Vessel Name
- Solstice
- Vessel Make
- Grand Banks 47 Eastbay FB
Take it apart, look for identifying information/marks. That may help you figure out who made it. Then find that vendor.
GB used these folks for a lot of their hardware: https://izerwaren.com/
You may need to browse their circa-1990's era catalog pages to see if there's a match listed.
GB used these folks for a lot of their hardware: https://izerwaren.com/
You may need to browse their circa-1990's era catalog pages to see if there's a match listed.
