sdowney717
Guru
- Joined
- Jan 26, 2016
- Messages
- 2,264
- Location
- United States
- Vessel Name
- Old Glory
- Vessel Make
- 1970 Egg Harbor 37 extended salon model
with the recent cold, I just remembered to drain 5 heat exchangers.
So why cant some of them be self draining?
So the discharge to the rest of the system is at the lowest point of the heat exchanger
It also bothers me that the 2 engine heat exchangers when drained splash salty water onto the front motor mount. I think some changes would help that regardless.
Part of the issue is the drain doubles as a zinc anode. So could involve drilling another hole for a drain and a connected tube, such as a valve and hose.
So why cant some of them be self draining?
So the discharge to the rest of the system is at the lowest point of the heat exchanger
It also bothers me that the 2 engine heat exchangers when drained splash salty water onto the front motor mount. I think some changes would help that regardless.
Part of the issue is the drain doubles as a zinc anode. So could involve drilling another hole for a drain and a connected tube, such as a valve and hose.