View Single Post
Old 01-17-2022, 08:56 AM   #13
rslifkin
Guru
 
City: Rochester, NY
Vessel Name: Hour Glass
Vessel Model: Chris Craft Catalina 381
Join Date: Aug 2019
Posts: 5,252
The flip link is a good solution, but it requires enough length between the shank and windlass (I don't have enough on my setup).

As far as getting the anchor up and over the roller, some roller setups and some anchors just don't pair well. Some anchors need a double roller, some need an articulated roller, and sometimes it's just about getting the roller to windlass geometry correct for it to come up nicely.


Take a look (ideally as a side view) at how everything is aligned at the point where the anchor hangs up and won't pull up any further. If possible, grab a picture for us, as that may make it easier to see what kind of changes would or wouldn't help.
rslifkin is offline   Reply With Quote