View Single Post
Old 12-06-2021, 09:29 AM   #2
RonR
Guru
 
RonR's Avatar
 
City: Everett WA.
Vessel Name: Triton
Vessel Model: 48' Golden Egg Harbor
Join Date: May 2019
Posts: 713
We have been looking into this as well.
There is a local company to me that will cut the glass and polish the edge. They sell the glass with a special glue that has a fancy tip on the cartarage. It leaves a nice little diamond shape. This way you have the proper gap when cured for flex. I have seen one other boat change out to this style. They cut out cardboard for a templet and held a 1.5 inch tint on the inside edge to hide the glue line.They used some suction cups on the inside and tied tham back to the far side of the boat. And some scrap wood as a bottom base to keep them from sliding down. Looks very nice when done.
RonR is offline   Reply With Quote