what is it and is it obsolete?

The friendliest place on the web for anyone who enjoys boating.
If you have answers, please help by responding to the unanswered posts.

PMF1984

Guru
Joined
Sep 10, 2016
Messages
637
Location
United States
Vessel Name
Wanderer
Vessel Make
Pilgrim 40
2.5 inches by 18.5 inches, weighs 4.5 pounds
 

Attachments

  • IMG_20210802_164835817.jpg
    IMG_20210802_164835817.jpg
    153.4 KB · Views: 170
I've seen sintered bronze plates that bolt through a hull as part of the ground for an antenna system (as I remember it anyway)

The ones I have seen look more like solid bronze with a sort of fibery texture, but I wonder if it's a variation on that. Maybe homemade? The idea is to get more surface area.

Here is a commercial one. It would be fastened on the outside of the hull underwater.

ma-ra204.jpg
 
Last edited:
Frosty, thanks for the reply.

This came off a 1939 Matthew’s. I turned the boat into wood stove size units in 1979. There were quite a few previous owner fabricated systems on the boat.

One thing I don’t think it was is a radio ground. There was no radio on the boat when I bought it.
 
A mounting bracket for a strainer like perhaps a Groco?
 
No this was outside the hull, see the copper bottom paint on it.

And the long bolts tell me they went through the planking.
 
Not many choices....my guess is home made grounding plate like sintered bronze for LORAN or general noise....agree with Frosty.


Back in those days, boaters had AM radios that could have benefited from it...so maybe.
 
Last edited:
Ok, thanks for the thoughts.

Looks like the scrap pile for this one.
 
What is the material? A bit of filing should give an answer.
Bright relatively soft is likely aluminum.
Reddish and relatively soft may be copper
Reddish brown may be a bronze.
 
Red, to red brown.

So copper or bronze.

Came off the boat in 1978, when things were cheap.
 
Looks like a sea chest cover designed to keep big stuff out. Bronze.
 
Back
Top Bottom