The boat is somewhat back together after my inverter fail. Not having a backup means of charging the batteries while waiting for my new charger/inverter unit to arrive bothered me so I rigged up this temporary setup to be able to connect a trickle charger/maintainer to my combined house/starter set. It is woefully undersized but the boat is just sitting at the dock with everything off but the bilge pumps. My 4 group 31 batteries sit on opposite sides of the boat and the only place they all connected before was on the inverter's posts via four sets of 2 gauge wiring, all equal in length. Without the inverter in place and without any terminal posts to tie them together, I rigged up this setup out of expanded PVC board.
|