Quote:
Originally Posted by saturnaisland
Hello All:
Was working on my windlass when I accidently spilled close to a litre (quart) of 140-weight gear oil on the raw, weathered teak deck. Mopped up what I could and got soap and water on it but a fair bit penetrated the teak in a five or six square-foot area. Looks bad.
Any suggestions on how to get the oil out even a little bit.
Thanks,
|
I had the same problem.....I made a bonehead error and ended up dumping some oil on my teak. It has lightened quite a bit over a couple months. Not sure there is anything we can do other than be patient and let the oil weather and lift off naturally.