Jeff F
Guru
- Joined
- Nov 5, 2015
- Messages
- 2,435
- Location
- Canada
- Vessel Name
- Escapade
- Vessel Make
- 50` US Navy Utility trawler conversion
My Deere 4045TFM75 has had the fuel in water alarm go off a couple of times. The first time it went off I drained all the filters and found no evidence of water. The second time I looked a little more closely, and I don't think the sensor is actually in place.
The plug in the picture is on a black wire that connects to the wiring harness on the filter assembly. I'm guessing that it is meant to connect to a sensor at the bottom of the filter, and I don't have that component. The other possibility is that the sensor is in the assembly.
I sprayed wd40 into the plug, thinking it might be the sensor, and no more alarms. But I'd like to know more about this.
Can anyone fill me in?
The plug in the picture is on a black wire that connects to the wiring harness on the filter assembly. I'm guessing that it is meant to connect to a sensor at the bottom of the filter, and I don't have that component. The other possibility is that the sensor is in the assembly.
I sprayed wd40 into the plug, thinking it might be the sensor, and no more alarms. But I'd like to know more about this.
Can anyone fill me in?
